There are many types of self-drilling screws, so how should we use them correctly? Below, Hebei Wotu Fastener Manufacturing Co., Ltd. will guide you through the process.
There are many types of self-drilling screws, so how should we use them correctly? Below, Hebei Wotu Fastener Manufacturing Co., Ltd. will guide you through the process.
Self-drilling screws require a dedicated electric drill (600W recommended). Select a suitable socket or Phillips head bit and install it on the drill; then connect the screw. During installation, the screw and the drill must be perpendicular to the surface of the profiled steel sheet; turn on the power switch; forcefully drill to a center point. Apply approximately 13 kg of force to the drill by hand; ensure the force is on the same vertical line as the center point; turn on the power switch; do not stop midway; once the screw is in place, stop drilling immediately (to prevent incomplete or excessive drilling).
Different models of self-drilling screws often have different usage methods, so mastering the use of one model means mastering the use of many others.
For self-drilling wire manufacturers, choose Wotu!
For an M10–M24 U-bolt RFQ, buyers should send a dimensioned drawing that defines thread diameter, inside width, leg or overall length, bend geometry, thread length, application diameter, material or grade requirement, surface finish, matching nuts/washers, quantity, and packing needs. Nominal thread size alone is not enough because different measurement datums can produce U-bolts that look […]
When ordering L-shaped anchor bolts against an older standard, buyers should verify the standard’s current status, confirm the specification approved for the project, and reconcile the drawing, dimensions, material and foundation interface before releasing the purchase order. A legacy standard number on a product page or old drawing is not, by itself, sufficient evidence that […]
