Get Started

12mm Anchor Fastener Price Selection Guide | Hebei Wotu Fastener Manufacturing Co., Ltd.

12mm Anchor Fastener Price

A 12mm anchor fastener price only makes sense after the anchor type, material, finish, embedment length and packaging are clear. Two anchors with the same nominal diameter can have very different costs if one is a sleeve anchor for light-duty fixing and the other is an anchor bolt for structural base plates.

For buyers comparing quotations, the useful question is not just “how much is 12mm?” but “which 12mm anchor will hold the load, suit the base material and arrive in the form the site can install without rework?”

Request Quote View Products

Related Products

7-letter, 9-letter L-shaped anchor bolt (Chinese national standard GB/T799-1988 embedded anchor screw)

7-letter, 9-letter L-shaped anchor bolt (Chinese national standard GB/T799-1988 embedded anchor screw)

Brand: Wotu Surface: Natural black oxide treatment, customized hot-dip galvanized, zinc plated as required Specifications: Follow Chinese national standard GB/T799-1988, in stock M12-M48, total length 120mm~1500mm, nonstandard customized diameter, bending length, total screw length available Matching: Nuts, flat washers and spring washers of the same specification can be supplied in complete sets. Packaging: Bundling and packaging, using wooden pallets and film-wrapped export packaging in large quantities

Read More
U-bolt ( / U-bolt, M10/M12/M16/M20/M24 multiple specifications)

U-bolt ( / U-bolt, M10/M12/M16/M20/M24 multiple specifications)

Brand: Wotu Surface: natural black oxide / hot-dip galvanized / blue-white zinc plated, multiple processes available Specifications: Based on common industry drawing parameters, suitable for pipe diameter 25mm~139.7mm, screw diameter M10~M24, total length can be nonstandard customized Matching: can be matched with nut, flat washer and spring washer of the same specifications for complete shipment Packaging: Bundling and packaging + 25kg export carton, full-container wooden pallet wrapped with film, supports private-label export packaging

Read More
White Zinc Plated Hex Head Self-Drilling Screw

White Zinc Plated Hex Head Self-Drilling Screw

Brand: Hengzuan Surface: blue and white zinc plated, optional black oxide, color zinc plated coating Specifications: in stock 4.2/4.8/5.5/6.3mm wire diameter, length 16mm~165mm full size range, supports nonstandard customized rod length Packaging: 25kg export cartons, full-container wooden pallets wrapped with film, supports neutral packaging, private-label customization

Read More
Hex Head No. 5 Point Self-Drilling Screw

Hex Head No. 5 Point Self-Drilling Screw

Brand: Wotu Surface: blue and white zinc plated, customized color zinc plated, Dacromet anti-corrosion coating available Specifications: ST5.5, ST6.3 mainstream specifications, rod length 20mm~125mm, full size range in stock, support nonstandard customization, drilling to adapt to steel sheet 2-6mm Packaging: 25kg cartons, whole wooden pallets

Read More
Countersunk Head Blue Zinc Self-Drilling Screw

Countersunk Head Blue Zinc Self-Drilling Screw

Brand: Hengzuan Surface: blue and white zinc plated, can be customized color zinc plated, black oxide plated Specifications: in stock 3.5/3.9/4.2/4.8/5.5 mainstream wire diameter, rod length 13mm~75mm full size range, nonstandard length can be customized as needed Packaging: 25kg export cartons, full wooden pallets wrapped with film, supports neutral export packaging, private-label customization

Read More

Key details that affect a 12mm anchor fastener price

12mm anchor specification points

When comparing 12mm anchor fasteners, look beyond the headline price and check anchor style, thread size, total length, fixture thickness allowance, finish, supplied accessories and packaging. These details decide whether the quoted item matches the installation, drawing and purchasing quantity.

Criterion What To Check Why It Matters Buyer Tip
Anchor type and fixing method Confirm whether the 12 mm item is a wedge anchor, sleeve anchor, through bolt, chemical anchor stud, or another anchor fastener type. Different anchor designs use different components, machining, nuts, washers, and installation methods, so the unit price can change even when the nominal diameter is the same. Ask: “For this 12 mm price, which anchor type is included, and does it include nut and washer?”
Length and thread details Compare the total length, usable thread length, thread standard, and any required chamfer or point style. A longer 12 mm anchor uses more steel and may need different processing. Thread form also affects compatibility with nuts and installation tools. Send a drawing or state: “12 mm diameter, required total length, thread standard, and thread length.”
Material grade and strength requirement Verify the steel grade or strength class requested for the anchor and matching nut or washer, if supplied as a set. Material choice affects load performance, processing cost, and suitability for structural or light-duty fixing. Mixing unclear grades can cause site approval problems. Ask: “What material grade is the quote based on, and can the matching nut and washer be quoted to the same requirement?”
Surface finish and corrosion environment Specify plain, zinc plated, hot-dip galvanized, black oxide, or another finish, and describe indoor, outdoor, humid, or chemical exposure. Finishing changes both price and service life. A low-cost finish may be acceptable indoors but unsuitable for exposed concrete or outdoor steelwork. Ask: “Which finish is included in the 12 mm anchor fastener price, and is it suitable for the project environment?”
Order quantity and packing requirement Compare prices at the same quantity, packing style, label requirement, and whether anchors are quoted loose or in sets. Small batches, special cartons, labeling, or kitting can raise the effective unit price. Quotes are easier to compare when packing is identical. Ask: “Please quote the unit price for this quantity, with packing method, pieces per carton, and whether all accessories are included.”

Choosing the right 12mm anchor before requesting a quote

The main price difference usually comes from design and finish. Expansion anchors, wedge anchors, sleeve anchors and cast-in anchor bolts all solve different fixing problems, so a cheaper unit may not be cheaper if it needs a larger hole, extra setting time, re-drilling or replacement on site.

Diameter is also easy to misunderstand. Some buyers say 12mm when they mean the thread size, while others mean the drill hole or outside body diameter. Confirming the standard, length, thread, washer and nut requirements prevents a quotation that looks right on paper but does not fit the drawing or installation method.

Start with the application: concrete, masonry, steel base plate, equipment foot, bracket, railing or temporary fixture. The base material and load direction affect the anchor type more than the diameter alone. If the fastener will be used outdoors or in a damp area, finish and corrosion resistance become part of the buying decision, not an optional add-on.

Check the full size callout before comparing prices. A 12mm anchor may need a specific overall length, thread length, nut and washer combination, or embedment depth. Quotations based on diameter only often lead to mismatched stock, short threads or anchors that cannot pass through the fixture thickness.

Do not treat coating as a cosmetic choice. Zinc plating, hot-dip galvanizing, black finish or stainless material can affect appearance, corrosion behavior, thread fit and cost. If the fastener must match a drawing, project specification or site environment, state that requirement before asking for a unit price.

A practical next step is to send the anchor type, nominal diameter, length, finish, quantity, packaging preference and any drawing or standard reference. If any of those details are not fixed, ask which options are normally used for your base material and fixture so the quotation reflects a usable anchor, not just the lowest line item.

Criteria Importance Description Example Options
Anchor type Critical because the type determines how the fastener transfers load and how it is installed. Compare expansion, wedge, sleeve and cast-in designs according to the base material, fixture and installation stage. A post-installed expansion anchor may suit existing concrete, while a cast-in bolt is planned before concrete placement.
Meaning of 12mm Critical for fit because an ambiguous diameter can produce the wrong hole, thread or fixture clearance. Confirm whether the stated dimension refers to thread diameter, body diameter, drill-hole requirement or another drawing dimension. A quotation should identify the actual threaded size and installation dimensions instead of listing only “12mm.”
Length and embedment Critical for holding performance and fixture fit; diameter alone does not define the usable anchor. Check total length, threaded length, fixture thickness allowance and required embedment against the application. An anchor passing through a thick base plate may need a different length from one used with a thin bracket.
Material and finish Important where moisture, outdoor exposure, appearance or thread compatibility affects service requirements. Compare the specified material or finish for the environment rather than treating coating as a purely visual choice. A corrosion-sensitive installation may require a different finish or material from an indoor, dry application.
Quotation scope Important for a fair price comparison because accessories, packaging and order quantity can change the delivered purchasing cost. Check whether the price includes the required nuts, washers, packaging format and stated quantity basis. Two unit prices are not directly comparable if one includes matching washers and nuts and the other covers the anchor only.

Product Selection

Related Options

For a contractor fixing base plates or brackets into concrete, the priority is usually a consistent 12mm anchor that matches the hole size, embedment requirement and corrosion environment. A clear specification helps Hebei Wotu Fastener Manufacturing Co., Ltd. respond with a relevant price instead of a general diameter-based estimate.

Blog Articles / Reviews

Anchor Bolts: 7 Ordering Errors That Cause Site Rework

Anchor Bolts: 7 Ordering Errors That Cause Site Rework

ost anchor bolt ordering errors come from incomplete drawings, unclear dimensions, unsuitable material or coating choices, undefined tolerances, and mismatched nuts or washers. These mistakes affect steel fabricators, EPC contractors, equipment installers, importers, and distributors because anchor bolts are usually embedded before the connected structure arrives on site. Once concrete has cured, even a small […]

Oxidation Treatment Specifications for Self-Drilling Screw Fasteners

Oxidation Treatment Specifications for Self-Drilling Screw Fasteners

The surface treatment of self-drilling screws requires specific procedures. What manufacturing processes are generally used for surface treatment? Hebei Wotu Fastener Manufacturing Co., Ltd. will explain oxidation treatment below. The surface treatment of self-drilling screws requires specific procedures. What manufacturing processes are generally used for surface treatment? Hebei Wotu Fastener Manufacturing Co., Ltd. will explain […]

National Standards for Self-Drilling Screws – Fasteners

National Standards for Self-Drilling Screws – Fasteners

When using fasteners, are you familiar with the standards governing them? Today, Hebei Wotu Fastener Manufacturing Co., Ltd. will discuss the national standards for fasteners with you. Let’s take a look. 1. Standards for Fastener Product Dimensions: These specifically define the basic dimensions of the product; for threaded products, this also includes the basic dimensions […]

Applications of Anchor Bolts

Applications of Anchor Bolts

Fixed anchor bolts, also known as short anchor bolts, are cast in with the foundation and used to secure equipment that does not experience strong vibration or impact. 1. Fixed anchor bolts, also known as short anchor bolts, are cast in with the foundation and used to secure equipment that does not experience strong vibration […]

Frequently Asked Questions

Is a 12mm anchor suitable for every concrete fixing?

No. Suitability depends on the anchor design, concrete condition, load direction, embedment, fixture thickness and installation method. A 12mm diameter alone does not establish the allowable use, so the anchor should be matched to the application and any project specification.

When might a cast-in anchor bolt be preferable to a post-installed anchor?

Cast-in bolts can be considered when anchor positions are planned before concrete placement, such as for some base plates or equipment foundations. Post-installed expansion or sleeve anchors may be more practical for existing concrete, but they require suitable drilling, hole cleaning and installation conditions.

Does “12mm” always mean the same measurement?

No. It may refer to a threaded diameter, outside body diameter or a required drill-hole size, depending on the product and specification. Confirm the measurement, thread details and full length before comparing quotations.

What information should accompany a request for price?

Provide the anchor type, complete size, length, finish or material, quantity, base material, fixture thickness and required nuts or washers. A drawing, standard reference or photograph can also clarify details that a diameter-only request leaves open.

Can a lower unit price increase the installed cost?

Yes. An apparently cheaper anchor may require different drilling equipment, extra installation time, additional accessories or replacement if its length or design does not suit the fixture. Compare the complete usable specification rather than the unit price alone.

Related Search

12mm anchor fastener 10mm anchor fastener price 8mm anchor fastener price 12mm anchor bolt 10mm anchor fastener 8mm anchor fastener 1 inch drill machine price 8mm anchor bolt drill size 8mm anchor bolt 6mm fastener

Leave Your Message

Send the anchor type, full size or drawing, finish, quantity and intended base material. If you are unsure of the exact type, describe the fixture and installation environment so the quotation can be matched to the job.