Plastic Roofing Sheet Prices | Hebei Wotu Fastener Manufacturing Co., Ltd.
Plastic roofing sheet prices depend on more than the panel material. Profile, thickness, sheet size, light transmission, order quantity, packing and freight can all change the delivered cost. The right comparison starts with the roof area and use: a daylight roof for a farm building has different priorities from a weather-exposed workshop or a covered walkway.
Compare the price per usable roof area, not only the price of one sheet. Include overlaps, closures, screws, washers, trims and expected waste so a lower panel price does not become a higher installed cost.
Brand: Hengzuan Surface: screw color zinc plated + hex head outdoor paint Specifications: ST5.5, ST6.3, rod length 25mm～120mm in stock, supports nonstandard customization, suitable for drilling steel sheets 2～5mm Packaging: 25kg cartons, whole wooden pallets
Read More
Brand: Hengzuan Surface: blue and white zinc plated, color zinc plated can be customized on request Specifications: in stock 4.2/4.8/5.5/6.3mm mainstream wire diameter, length 20mm~165mm full range of specifications, nonstandard rod length, drill point size can be customized Packaging: 25kg export cartons, full pallets wrapped with film, supports neutral export packaging, customer private-label customization
Read More
Brand: Hengzuan Surface: blue and white zinc plated, can be customized color zinc plated, black oxide plated Specifications: Comply with GB/T15856.2 Chinese national standard, in stock ST3.5/ST4.2/ST4.8/ST5.5 mainstream wire diameter, rod length 13mm~50mm full range of specifications, nonstandard length customization on demand, drilling applicable plate thickness 2~5mm Packaging: 25kg export cartons, full pallets wrapped with film, supports neutral export packaging, private-label customization
Read More
Brand: Hengzuan Surface: Color zinc plated, optional blue-white zinc plated, black oxide treatment Specifications: Chinese national standard ST4.2/ST4.8/ST5.5 specifications, rod length 13~50mm in stock, supports nonstandard length customization Packaging: 25kg export cartons, full wooden pallets wrapped with film, supports neutral packaging, private-label customization
Read More
Brand: Hengzuan Surface: blue and white zinc plated, can be customized color zinc plated, black oxide plated Specifications: Comply with GB/T15856.2-2002 Chinese national standard, in stock ST4.2/ST4.8/ST5.5 full range of specifications, length 13mm~75mm optional, supports customized nonstandard rod lengths; drilling adaptation plate thickness 0.7~6mm Packaging: 25kg export cartons, full pallets wrapped with film, supports neutral export packaging, customer private-label customization
Read More
Brand: Hengzuan Surface: color zinc plated Specifications: in stock ST5.5/ST6.3 regular diameter, rod length 19mm~75mm in stock, supports nonstandard customized, suitable for drilling steel sheet thickness 2~5mm Packaging: carton packaging, full pallets wooden pallet packaging, support neutral packaging, private-label customization
Read MoreRoofing sheet selection factors
When evaluating a plastic roofing sheet package, compare material, profile, thickness, usable coverage, light transmission, weather and impact requirements, and compatibility with the supporting structure. For related fasteners, confirm the support material, screw dimensions, washer type, corrosion requirements and sealing arrangement rather than assuming one roofing screw fits every plastic panel.
| Criterion | What To Check | Why It Matters | Buyer Tip |
|---|---|---|---|
| Sheet material and grade | Confirm whether the quotation is for PVC, polycarbonate, FRP, or another plastic roofing sheet, and ask for the stated grade or resin type. | Different plastics age, transmit light, resist impact, and handle heat differently, so two sheets with the same size can have very different prices and service lives. | Ask: What exact plastic material is being quoted, and is there a datasheet for the grade? |
| Thickness and profile | Compare sheet thickness, corrugation shape, width, length, and usable coverage after overlaps, not only the nominal sheet size. | A cheaper sheet may cover less roof area or need more support, fasteners, and overlap allowance, which changes the real installed cost. | Ask for the price per usable square meter based on your roof layout, not just the price per sheet. |
| UV protection and weathering option | Ask whether the sheet has UV coating, co-extruded protection, or no stated weathering layer, and which side faces upward. | Outdoor roofing sheets without suitable UV protection can yellow, become brittle, or lose strength faster, especially on exposed roofs. | Ask: Is the UV-protected side marked, and what warranty or test information is available for outdoor exposure? |
| Fixing system compatibility | Match the sheet profile with the correct roofing screws, washers, caps, and support spacing recommended by the sheet supplier. | Incorrect fixing can cause cracks, leaks, pull-out, or excessive movement, and the extra hardware can affect the total project price. | Ask whether the quote includes recommended fasteners and sealing washers, or whether they are priced separately. |
| Delivery, packing, and breakage allowance | Clarify packing method, minimum order quantity, loading length limits, freight terms, and responsibility for damage in transit. | Long plastic sheets are bulky and can crack or scratch if poorly packed, so freight and replacement risk can change the final cost. | Ask for a landed cost estimate that separates sheet price, packing, freight, and any spare-sheet allowance. |
The main practical distinction is between a low purchase price and a low installed cost. A sheet that matches the roof profile and resists the site's heat, impact and weather conditions may cost more initially but reduce cutting, replacement and leakage problems. Thermal movement also matters: plastic panels need a compatible fixing arrangement rather than simply the shortest or cheapest screw.
Ask the supplier to confirm the sheet material, profile, usable coverage, fixing method and packing basis before comparing quotations. For the fasteners, check that the screw length suits the sheet and supporting structure, and that the washer and sealing arrangement are intended for roofing use. The related guidance on choosing roofing screw specifications and preventing leaks around roofing screws addresses common fixing decisions, although plastic sheets require confirmation of their own compatibility.
Start with the sheet application. Identify whether the roof needs daylight, impact resistance, chemical resistance, low weight or a particular appearance. PVC, polycarbonate and fibre-reinforced plastic products can have different balances of durability, light transmission and cost, so a price comparison is only useful after the required material and performance have been defined.
Check the actual coverage. Sheet length and width are not the same as usable coverage after side and end overlaps. Request the profile, nominal dimensions, usable coverage and recommended overlap, then calculate the quantity for the roof layout. Ignoring overlaps or ordering by gross area can leave too little material or create unnecessary waste.
Price the complete fixing system. Confirm the support material, screw type, screw length, washer, sealing method, ridge or edge trims and any closure pieces. A screw that looks long enough can still leak or fail to seal correctly if the washer, installation position or support does not suit the roof assembly. Avoid selecting fasteners by price alone or mixing components without checking compatibility.
Compare delivered quotations on the same basis. Ask whether the price covers the requested quantity, packing, accessories and delivery, and check how color, thickness, profile and order volume affect the offer. For an enquiry to Hebei Wotu Fastener Manufacturing Co., Ltd., provide the sheet profile and material, the supporting structure, and the required screw or washer details so the fastener response can be assessed against the roof application.
| Criteria | Importance | Description | Example Options |
|---|---|---|---|
| Cost per usable roof area | Essential for a fair price comparison. | Compare the panel price after accounting for overlaps, cutting waste, trims, closures, washers, screws, packing and freight. | A quote priced per sheet should also show the quantity required to cover the roof's usable area. |
| Material and performance fit | Critical when the roof faces heat, impact, chemicals or prolonged weather exposure. | Define the required balance of light transmission, durability, appearance and resistance before comparing PVC, polycarbonate or fibre-reinforced plastic options. | A sheltered covered walkway may have different material priorities from an exposed workshop roof. |
| Profile, dimensions and coverage | Necessary to avoid ordering too little material or creating excessive waste. | Check that the sheet profile matches the supporting roof system and compare nominal dimensions with usable coverage after the specified overlaps. | Two sheets with similar stated widths may cover different areas if their profiles require different side overlaps. |
| Fixing system compatibility | Important for controlling leakage and preventing problems caused by movement or poor sealing. | Check the support material, screw dimensions, washer type, sealing arrangement and fixing positions as one system rather than choosing a fastener separately. | A fixing suitable for a metal support may not be appropriate for a plastic panel on a timber support without confirmation. |
| Quotation and delivery basis | Important because different offers may include different quantities, accessories or packing assumptions. | Confirm what the quoted amount covers, including sheet quantity, accessories, packing and delivery, and ask how profile, thickness, color or order volume changes the offer. | Compare two quotations only after confirming that both use the same sheet basis and include the accessories needed for installation. |
Related Options
For a daylight roof over a workshop, agricultural building or covered walkway, the main priority is a compatible sheet-and-fixing combination that controls leakage and accommodates movement. Compare any proposed product by its fit with the roof profile, support structure and installation method, not by panel price alone.
The correct self-tapping roofing screw depends on the complete panel-and-substrate stack-up. Steel supports typically require a point and thread matched to the support thickness and any pilot-hole requirement; timber supports require a wood-appropriate thread and sufficient embedment. In both cases, buyers must define diameter, length, head, sealing washer, material or coating, environment, pull-out requirements, and […]
Direct answer: Correct screw length does not guarantee a watertight metal-roof connection. Self tapping roofing screws can leak because of incorrect washer compression, enlarged or stripped holes, insufficient thread engagement, panel movement, or an unsuitable coating-and-washer system. Buyers should diagnose the complete installed connection—including panel profile, support thickness, point type, washer condition, and exposure—rather than […]
Start with the building's exposure and required service life, then compare PVC, polycarbonate and fibre-reinforced plastic options for light transmission, impact resistance, chemical exposure and weather conditions. A lower-priced material may be suitable for a sheltered walkway but unsuitable for a roof exposed to severe heat, impact or aggressive chemicals; confirm the relevant product information before ordering.
Not necessarily. A lower sheet price can be offset by greater overlap, cutting waste, extra trims, incompatible fixings, difficult installation or earlier replacement, so compare the complete cost for usable roof area rather than the price of one panel.
No. Side and end overlaps reduce the usable coverage, and the roof layout may create additional cutting waste. Ask for nominal dimensions, usable coverage and recommended overlaps before calculating the required quantity.
No. The screw length, support material, washer, sealing arrangement and fixing position must suit the sheet profile and allow for the panel's movement. Confirm compatibility for the specific plastic sheet rather than selecting a screw only by length or price.
Provide the material, profile, thickness, sheet dimensions or usable coverage, required quantity or roof area, light-transmission needs and project conditions. If fasteners are required, also state the supporting structure, screw or washer requirements, packing expectations and delivery destination so the quotation basis is clear.
Tell us the sheet material and profile, the supporting structure, and the quantity or roof area. If you need fasteners, include the required screw length or washer type and the project location for a more relevant enquiry.
