Get Started

L Shaped Anchor Bolts Selection Guide | Hebei Wotu Fastener Manufacturing Co., Ltd.

L Shaped Anchor Bolts for Concrete Foundations

L shaped anchor bolts are cast into concrete foundations so a projecting threaded end can secure steel columns, equipment bases, frames and other structures. The main buying decision is matching the bolt’s thread, leg geometry, embedment and material finish to the baseplate drawing and the foundation design.

The bent leg provides mechanical anchorage inside the concrete, but the bolt must also fit the installation template and leave enough exposed thread for the nut, washer and baseplate. Confirm the complete shape rather than ordering from diameter alone.

Request Quote View Products

Related Products

7-letter, 9-letter L-shaped anchor bolt (Chinese national standard GB/T799-1988 embedded anchor screw)

7-letter, 9-letter L-shaped anchor bolt (Chinese national standard GB/T799-1988 embedded anchor screw)

Brand: Wotu Surface: Natural black oxide treatment, customized hot-dip galvanized, zinc plated as required Specifications: Follow Chinese national standard GB/T799-1988, in stock M12-M48, total length 120mm~1500mm, nonstandard customized diameter, bending length, total screw length available Matching: Nuts, flat washers and spring washers of the same specification can be supplied in complete sets. Packaging: Bundling and packaging, using wooden pallets and film-wrapped export packaging in large quantities

Read More
U-bolt ( / U-bolt, M10/M12/M16/M20/M24 multiple specifications)

U-bolt ( / U-bolt, M10/M12/M16/M20/M24 multiple specifications)

Brand: Wotu Surface: natural black oxide / hot-dip galvanized / blue-white zinc plated, multiple processes available Specifications: Based on common industry drawing parameters, suitable for pipe diameter 25mm~139.7mm, screw diameter M10~M24, total length can be nonstandard customized Matching: can be matched with nut, flat washer and spring washer of the same specifications for complete shipment Packaging: Bundling and packaging + 25kg export carton, full-container wooden pallet wrapped with film, supports private-label export packaging

Read More
Hex nut DIN934-1987 (A/B accuracy classification)

Hex nut DIN934-1987 (A/B accuracy classification)

Brand: Wotu Standard basis: German standard DIN934-1987, metric coarse thread/fine thread universal thread Surface: 304 stainless steel Specifications: M6～M24 full range of specifications Supporting equipment: same specification bolts, flat washer, spring washer complete set of shipment Packaging: 25kg standard carton, whole wooden pallet packaging

Read More
Hex nut (Chinese national standard GB52-1976)

Hex nut (Chinese national standard GB52-1976)

Brand: Wotu Surface: 304 stainless steel Specifications: in stock M6~M24 full standard metric specifications, supports nonstandard pitch, thickening/customized Matching: Can be matched with bolts of corresponding specifications, flat washer, spring washer complete set of supporting shipment Packaging: 25kg cartons, whole wooden pallets

Read More
Hot-Dip Galvanized Chinese National Standard Flat Washer (GB/T97.1A Level Flat Washer)

Hot-Dip Galvanized Chinese National Standard Flat Washer (GB/T97.1A Level Flat Washer)

Brand: Wotu Surface: overall hot-dip zinc plated anti-corrosion treatment, optional blue-white zinc plated, color zinc plated, black oxide Specifications: Execute GB/T97.1-2002 Chinese national standard, in stock M6-M64 full range of specifications, inner diameter, outer diameter, thickness strictly comply with Chinese national standard parameters, support nonstandard size customized Packaging: 25kg woven bag / export carton packaging, full pallets wrapped with film, supports private-label customization

Read More
Hot-Dip Galvanized Hex Nut (DIN934 Thickened/GB Thin Nut In Multiple Specifications)

Hot-Dip Galvanized Hex Nut (DIN934 Thickened/GB Thin Nut In Multiple Specifications)

Brand: Wotu Surface: high temperature hot dip zinc plated surface treatment Specifications: Comply with DIN934, GB/T6170, GB/T6172.1 Chinese national standard German standard, in stock M6-M64 full range of specifications, length is nonstandard customized as required Packaging: 25kg woven bag/export carton, full-container wooden pallet wrapped with film, supports neutral packaging, private-label customization

Read More

Match the bolt geometry to the foundation template

L shaped anchor bolt selection

Compare L shaped anchor bolts by the full geometry: thread size and length, total length, bent-leg dimensions, bend radius, projection, material, coating, dimensional tolerance and compatibility with the fixing nuts and washers. A drawing or sample can resolve shape and fit questions before production is approved.

Criterion What To Check Why It Matters Buyer Tip
Leg length and embedment depth Compare the required embedment depth on the drawing with the long leg length of the L shaped anchor bolt. Too little embedment can reduce holding capacity; too much length can clash with reinforcement, sleeves, or the bottom of the concrete form. Ask: What is the required embedded length, exposed thread length, and total bolt length for this foundation?
Thread diameter, pitch, and usable thread length Confirm the bolt diameter, thread standard, nut fit, and how much thread must remain above the base plate after leveling. Short threads can prevent proper nut engagement, while the wrong pitch can delay installation if site hardware does not match. Ask: Which nut and washer standard will be used, and how many millimeters of usable thread are needed above the plate?
Hook orientation and bend shape Verify the L bend direction, inside bend radius, and short leg length against the anchor bolt layout. Incorrect hook direction or bend geometry can interfere with placement and may require rework before concrete pouring. Ask: Can the bolt drawing show the hook orientation relative to the column line or template holes?
Material grade and surface finish Match the specified steel grade and coating to the load requirement and exposure conditions, such as indoor concrete, outdoor foundations, or corrosive environments. Material strength affects structural performance, while finish choice affects corrosion resistance and thread fit after coating. Ask: Is the project calling for plain, zinc plated, or hot-dip galvanized anchor bolts, and should nuts and washers have the same finish?
Template and installation tolerance Check whether the bolts will be supplied or installed with a positioning template and confirm hole spacing, projection height, and verticality tolerance. L shaped anchor bolts are cast into concrete, so placement errors are difficult to correct after curing. Ask: Do you need anchor bolts packed by assembly set with nuts, washers, and a template for each base plate?

Confirm fit, anchorage and finish before ordering

The key distinction is between a cast-in L shaped anchor bolt and a post-installed anchoring system. An L shaped bolt is positioned before the concrete is poured, while post-installed systems are fitted after curing and follow different design and installation requirements.

The bent leg can help resist pullout and rotation inside the foundation, but it does not compensate for insufficient embedment, incorrect spacing or a mismatch with the baseplate. For an existing foundation, check whether a post-installed solution is allowed by the structural design instead of substituting an L shaped bolt without review.

Start with the connection drawing. Specify the nominal thread size, threaded length, overall length, leg length, bend orientation, bend radius and required projection above the concrete. Also state the bolt layout, because the center-to-center spacing and template position often matter as much as the bolt itself.

Choose the material and surface finish for the exposure and installation environment. Plain steel may suit protected indoor foundations, while a corrosion-resistant finish may be relevant outdoors or in damp areas. Confirm how the finish affects thread fit, nut compatibility and any welding or coating operations carried out around the foundation.

Avoid ordering only by a label such as “L bolt” or by thread diameter. Missing information about the short-leg direction, embedment, thread runout, washer seating area or allowable dimensional tolerance can cause the bolts to miss the template or leave too little thread above the baseplate. Ask for a dimensioned drawing before approving a repeat order.

For an enquiry, send the baseplate or foundation drawing together with the required quantity, material or coating preference and installation environment. Ask Hebei Wotu Fastener Manufacturing Co., Ltd. to confirm which dimensions, tolerances, thread form and inspection records it can provide for the requested configuration.

Criteria Importance Description Example Options
Installation stage and anchor type Critical because the choice depends on whether the concrete is new or already cured. An L-shaped bolt is cast into the foundation before the pour. A post-installed anchor is fitted afterward and follows a different design and installation approach. A new equipment foundation may use cast-in L-shaped bolts; an existing slab may require a separately designed post-installed system.
Bolt geometry and foundation layout Critical for baseplate fit and accurate placement. Check thread size and length, overall length, leg length, bend orientation, bend radius, projection, embedment and center-to-center spacing against the drawing. A bolt can have the correct thread diameter but still fail to fit if the bent leg or exposed projection does not match the template.
Material and surface finish Important for service environment and long-term maintenance. Select the material or finish according to exposure, then confirm its effect on thread fit, nut compatibility and nearby coating or fabrication work. A protected indoor foundation and an outdoor foundation may call for different corrosion-protection choices.
Thread, nut and washer compatibility Critical for seating the baseplate and tightening the connection correctly. Confirm the thread form, threaded length, thread runout and the matching nuts and washers. The exposed thread must accommodate the baseplate, washer and nut without obstructing installation. A bolt with adequate total length may still be unsuitable if its threaded section is too short after the baseplate is installed.
Alternative bent-leg configuration Important when space, anchorage or the installation template limits the available shape. Straight, J-shaped, U-shaped or post-installed alternatives are not interchangeable by label alone. Compare their load path, space requirements, embedment and compatibility with the approved foundation design. A restricted foundation edge may make one bend orientation impractical even when the thread and overall length appear correct.

Product Selection

Related Options

For a steel column or equipment base being cast into a new concrete foundation, the main priority is accurate bolt placement and enough usable thread above the finished surface. Compare configurations that match the baseplate template, then verify the embedment and corrosion-protection requirements with the project designer.

Blog Articles / Reviews

Anchor Bolts: 7 Ordering Errors That Cause Site Rework

Anchor Bolts: 7 Ordering Errors That Cause Site Rework

ost anchor bolt ordering errors come from incomplete drawings, unclear dimensions, unsuitable material or coating choices, undefined tolerances, and mismatched nuts or washers. These mistakes affect steel fabricators, EPC contractors, equipment installers, importers, and distributors because anchor bolts are usually embedded before the connected structure arrives on site. Once concrete has cured, even a small […]

Applications of Anchor Bolts

Applications of Anchor Bolts

Fixed anchor bolts, also known as short anchor bolts, are cast in with the foundation and used to secure equipment that does not experience strong vibration or impact. 1. Fixed anchor bolts, also known as short anchor bolts, are cast in with the foundation and used to secure equipment that does not experience strong vibration […]

Why Do U Bolts Loosen in Pipe Supports? 6 Causes and Prevention Methods

Why Do U Bolts Loosen in Pipe Supports? 6 Causes and Prevention Methods

U bolts usually loosen in pipe supports because the connection loses clamping force, receives continuous vibration, restricts thermal pipe movement, uses an incorrectly sized U bolt, experiences surface settlement, or suffers from corrosion and inadequate inspection. This issue affects EPC contractors, pipe installers, industrial maintenance teams, equipment manufacturers and fastener distributors working with water, oil […]

DIN 931 vs DIN 933 Hex Bolts: What Should Buyers Confirm Before Bulk Ordering?

DIN 931 vs DIN 933 Hex Bolts: What Should Buyers Confirm Before Bulk Ordering?

DIN 931-style half-thread and DIN 933-style full-thread hex bolts should not be selected from diameter and overall length alone. The practical choice depends on the joint stack, required grip, location of the thread transition, available nut engagement, mating hardware, material or property requirement, coating system and governing product specification. A half-thread bolt is not automatically […]

The Widespread Application of Hot-Dip Galvanized Bolts in Daily Life

The Widespread Application of Hot-Dip Galvanized Bolts in Daily Life

Hot-dip galvanized bolts are widely used in daily life, especially due to their advantages, which have led to their rapid development in the market and widespread consumer appeal. So what are the specific advantages of hot-dip galvanized bolts in use? Today, Hebei Wotu Fastener Manufacturing Co., Ltd. will discuss this with you. 1. Due to […]

The Widespread Application of Hot-Dip Galvanized Bolts in Daily Life

The Widespread Application of Hot-Dip Galvanized Bolts in Daily Life

Hot-dip galvanized bolts are widely used in daily life, especially due to their advantages, which have led to their rapid development in the market and widespread consumer appeal. So what are the specific advantages of hot-dip galvanized bolts in use? Today, Hebei Wotu Fastener Manufacturing Co., Ltd. will explain. 1. Due to its special surface […]

Frequently Asked Questions

Can these bolts be used in an existing concrete foundation?

L-shaped anchor bolts are normally positioned before concrete is poured, so they are not a direct substitute for an anchor installed into cured concrete. For an existing foundation, the structural designer should assess a suitable post-installed system and its installation requirements.

Is choosing a larger thread diameter enough to improve the connection?

No. Capacity and fit also depend on embedment, bent-leg geometry, bolt spacing, projection, baseplate holes and the concrete design. A larger diameter can still be unsuitable if the bolt misses the template or does not leave enough usable thread above the plate.

When should the bolt have a corrosion-resistant finish?

The exposure around the foundation should guide the material and finish choice. Outdoor, damp or chemically exposed locations may require more corrosion protection than a dry, protected installation; confirm that the finish is compatible with the nuts, washers, thread fit and any later coating work.

What information should accompany a purchase enquiry?

Provide the baseplate or foundation drawing, quantity, thread size, threaded length, overall length, leg dimensions, bend orientation, required projection, material or finish and relevant tolerances. A dimensioned sketch or sample is useful when the bolt has a non-standard bend, template or washer arrangement.

Can an L-shaped bolt be replaced by a straight or J-shaped anchor bolt?

Not automatically. Each shape transfers load and occupies the foundation differently, so the replacement must match the structural design, embedment, spacing and baseplate layout. Treat another shape as an engineering change rather than a like-for-like substitution.

Related Search

7-letter, 9-letter l-shaped anchor bolt (chinese national st 7 letter l shaped anchor bolt chinese national standard gb t799 1988 embedded anchor screw 10mm anchor fastener 10mm anchor fastener price 12mm anchor bolt 12mm anchor fastener 12mm anchor fastener price 16mm anchor bolt 6mm anchor bolt 8mm anchor bolt

Leave Your Message

Please provide the required thread size and bolt dimensions, the baseplate or foundation layout, and the intended material or surface finish so we can review the configuration.