Get Started

Anchor Fastener Bolts for Concrete | Hebei Wotu Fastener Manufacturing Co., Ltd.

Anchor fastener bolts for concrete and masonry fixing

An anchor fastener bolt secures a baseplate, frame, bracket or other component to concrete or masonry. The main purchasing decision is matching the bolt system to the base material, installation stage and load direction, rather than choosing by diameter alone.

For foundation work, cast-in anchor bolts are positioned before concrete placement. For existing concrete or masonry, post-installed anchors may use expansion, sleeve or chemical anchoring methods. Each option changes the required hole, embedment, installation process and inspection requirements.

Request Quote View Products

Related Products

7-letter, 9-letter L-shaped anchor bolt (Chinese national standard GB/T799-1988 embedded anchor screw)

7-letter, 9-letter L-shaped anchor bolt (Chinese national standard GB/T799-1988 embedded anchor screw)

Brand: Wotu Surface: Natural black oxide treatment, customized hot-dip galvanized, zinc plated as required Specifications: Follow Chinese national standard GB/T799-1988, in stock M12-M48, total length 120mm~1500mm, nonstandard customized diameter, bending length, total screw length available Matching: Nuts, flat washers and spring washers of the same specification can be supplied in complete sets. Packaging: Bundling and packaging, using wooden pallets and film-wrapped export packaging in large quantities

Read More
U-bolt ( / U-bolt, M10/M12/M16/M20/M24 multiple specifications)

U-bolt ( / U-bolt, M10/M12/M16/M20/M24 multiple specifications)

Brand: Wotu Surface: natural black oxide / hot-dip galvanized / blue-white zinc plated, multiple processes available Specifications: Based on common industry drawing parameters, suitable for pipe diameter 25mm~139.7mm, screw diameter M10~M24, total length can be nonstandard customized Matching: can be matched with nut, flat washer and spring washer of the same specifications for complete shipment Packaging: Bundling and packaging + 25kg export carton, full-container wooden pallet wrapped with film, supports private-label export packaging

Read More
Hot-Dip Galvanized Hex Head Bolt (DIN931 Half Thread / DIN933 Full Thread / GB30 Chinese National Standard Bolt, Can Be Equipped With Nut And Washer Set)

Hot-Dip Galvanized Hex Head Bolt (DIN931 Half Thread / DIN933 Full Thread / GB30 Chinese National Standard Bolt, Can Be Equipped With Nut And Washer Set)

Brand: Wotu Surface: overall hot-dip zinc plating treatment Specifications: Comply with DIN and GB standards, in stock M6-M48 full range of specifications, length 20mm-300mm, supports nonstandard customized. Packaging: woven bag inside / 25kg export carton, film-wrapped wooden pallet; supports neutral packaging and customer private-label customization.

Read More
Hex nut (Chinese national standard GB52-1976)

Hex nut (Chinese national standard GB52-1976)

Brand: Wotu Surface: 304 stainless steel Specifications: in stock M6~M24 full standard metric specifications, supports nonstandard pitch, thickening/customized Matching: Can be matched with bolts of corresponding specifications, flat washer, spring washer complete set of supporting shipment Packaging: 25kg cartons, whole wooden pallets

Read More
Hex flange nut (Chinese national standard GB/T6177.1-2000)

Hex flange nut (Chinese national standard GB/T6177.1-2000)

Brand: Wotu Surface: zinc plated Specifications: in stockM6/M8/M10/M12/M14/M16/M20 Chinese national standardfull range of specifications, support nonstandard thickness, tooth pitch customized Matching: can be matched with bolts of the same specification, flat washer, spring washer complete set of shipment Packaging: 25kg cartons, whole wooden pallets

Read More
Grade 8/Grade 10 High-strength Black Oxide Hex Nut (DIN934/GB Chinese National Standard Thickened Nut)

Grade 8/Grade 10 High-strength Black Oxide Hex Nut (DIN934/GB Chinese National Standard Thickened Nut)

Brand: Wotu Surface: quenching and tempering heat treatment + high temperature black oxide anti-rust treatment Specifications: Comply with DIN934, GB/T6170 standards, in stock M6-M48 full range of specifications, nonstandard sizes can be customized Packaging: 25kg carton/woven bag inner packaging, whole wooden pallet wrapped with film for export packaging, supports neutral/private-label customization packaging

Read More

Compare anchor bolts by substrate, installation method and load

Anchor bolt selection criteria

Compare anchor fastener bolts by anchoring method, substrate suitability, load direction, embedment arrangement, thread and nut compatibility, corrosion exposure and installation tolerances. A drawing showing the baseplate and hole layout is often more useful than a product name alone.

Criterion What To Check Why It Matters Buyer Tip
Anchor type for the base material Confirm whether the project needs cast-in anchor bolts, mechanical expansion anchors, wedge anchors, sleeve anchors, or another fixing method suitable for the concrete, masonry, or structural base. The wrong anchor style can fail to grip properly, crack weak material, or require site rework after holes have already been drilled or cast. Ask: What is the base material, and is the anchor fastener bolt installed before concrete placement or after curing?
Diameter, length, and embedment requirement Compare the specified bolt diameter, total length, thread length, and required embedment depth against the drawing or engineer’s schedule. Small dimensional errors can leave too little thread for the nut, insufficient embedment for load transfer, or interference with plates and leveling nuts. Ask: Can you confirm the required diameter, overall length, exposed thread length, and embedment depth from the project drawing?
Thread standard and nut compatibility Verify metric or imperial thread, pitch, tolerance, and matching nuts and washers before ordering. A bolt with the wrong thread form may not assemble with site hardware, even if the diameter appears correct. Ask: Should the anchor bolts be supplied with matching nuts and washers, and what thread standard should they follow?
Material grade and corrosion protection Confirm the required steel grade and finish, such as plain, zinc plated, hot-dip galvanized, or another coating specified by the project. Strength and corrosion resistance affect service life, especially for outdoor structures, damp environments, foundations, and exposed steelwork. Ask: What strength grade and surface finish are shown on the specification or drawing?
End form, bend shape, and installation detail For cast-in anchors, check whether the design calls for L-type, J-type, straight, plate-welded, or other end geometry; for drilled anchors, confirm hole size and setting method requirements. The end form and installation method determine how the anchor transfers load and how easily crews can place it accurately on site. Ask: Is there a drawing showing the anchor shape, bend dimensions, projection above concrete, and installation position?

Choose the anchor configuration for your foundation or concrete application

The practical distinction is between cast-in and post-installed anchoring. Cast-in bolts suit new foundations where the bolt position can be planned before the pour. Post-installed anchor bolts suit completed concrete or masonry, but the installer must confirm the base material, hole condition, edge distance and embedment before selecting the system.

A threaded rod used with chemical adhesive is not interchangeable with an expansion anchor simply because the thread size is similar. The anchoring method must suit the substrate and the expected tension, shear or combined loading. Ask for the intended application and installation sequence before comparing quotations.

Start with the base material. State whether the anchor will enter reinforced or plain concrete, brick, blockwork or another substrate. Hollow or weak masonry can require a different anchoring method from sound concrete. Do not approve a bolt based only on a nominal size if the substrate is uncertain.

Choose the installation stage. Cast-in bolts require an accurate layout, temporary positioning and protection of the threads during concrete placement. Post-installed anchors offer more flexibility after construction, but drilling can affect edge distances, reinforcement and hole cleanliness. Confirm the installation method with the project drawings and site team.

Match the geometry and finish. Check thread form, diameter, usable thread length, overall length, washer and nut compatibility, bend or head arrangement, and the clearance available around the baseplate. For outdoor, damp or chemically exposed locations, ask which coating or material is offered and whether it suits the exposure. Avoid mixing nuts, washers and bolts without confirming thread and material compatibility.

Send a clear enquiry. Provide a drawing or marked-up detail, the substrate, installation stage, required dimensions and quantity. Also state the main load direction or application, such as a column base, equipment frame, guardrail or pipe support. Ask Hebei Wotu Fastener Manufacturing Co., Ltd. which anchor configuration, material or finish it can supply for those conditions, and request confirmation of the applicable standard if your project specifies one.

Criteria Importance Description Example Options
Installation stage Critical because it determines whether the bolt must be positioned before concrete placement or installed after the structure is complete. Cast-in bolts require accurate setting out and thread protection during the pour. Post-installed systems allow later installation but add drilling and hole-preparation requirements. Use a cast-in arrangement for a planned column foundation; consider a post-installed system for fixing equipment to an existing slab.
Base material Critical because concrete, solid masonry, hollow blockwork and other substrates do not provide the same anchoring behavior. The substrate affects the suitable anchor type, embedment approach, edge-distance needs and installation checks. A bolt selected for sound concrete should not be assumed suitable for hollow or weak masonry. A baseplate on sound concrete may use a different anchoring method from a bracket fixed to hollow blockwork.
Load direction and application Important because tension, shear and combined loading place different demands on the anchor and surrounding substrate. Review the connection detail, baseplate, load path and proximity to edges before comparing nominal bolt sizes. Applications such as column bases, equipment frames, guardrails and pipe supports may require different configurations. A column base may require attention to uplift and shear, while a light bracket may be governed mainly by the fixing layout and substrate.
Geometry and compatibility Important because incorrect projection, embedment, thread length or mating hardware can prevent proper assembly. Check overall length, usable thread, diameter, bend or head form, hole pattern, clearance, thread form, nut and washer compatibility, and the required projection above the baseplate. A bolt can have the correct nominal diameter but still be unsuitable if its threaded projection does not accommodate the baseplate, washer and nut.
Material and environmental exposure Important where moisture, chemicals or outdoor exposure could affect the bolt, coating or mating hardware. Select the material or finish with the service environment in mind and confirm compatibility across the complete connection. Avoid assuming that one coating suits every damp or chemically exposed location. An indoor dry installation and an exposed installation near moisture may require different material or finish considerations.

Product Selection

Related Options

For a column base or equipment frame on existing concrete, the priority is a correctly matched post-installed system with verified hole and embedment requirements. For a new foundation, prioritize accurate cast-in positioning, projection and thread protection. The appropriate choice depends on the application details, not on a general ranking of bolt types.

Blog Articles / Reviews

Anchor Bolts: 7 Ordering Errors That Cause Site Rework

Anchor Bolts: 7 Ordering Errors That Cause Site Rework

ost anchor bolt ordering errors come from incomplete drawings, unclear dimensions, unsuitable material or coating choices, undefined tolerances, and mismatched nuts or washers. These mistakes affect steel fabricators, EPC contractors, equipment installers, importers, and distributors because anchor bolts are usually embedded before the connected structure arrives on site. Once concrete has cured, even a small […]

Applications of Anchor Bolts

Applications of Anchor Bolts

Fixed anchor bolts, also known as short anchor bolts, are cast in with the foundation and used to secure equipment that does not experience strong vibration or impact. 1. Fixed anchor bolts, also known as short anchor bolts, are cast in with the foundation and used to secure equipment that does not experience strong vibration […]

Why Do U Bolts Loosen in Pipe Supports? 6 Causes and Prevention Methods

Why Do U Bolts Loosen in Pipe Supports? 6 Causes and Prevention Methods

U bolts usually loosen in pipe supports because the connection loses clamping force, receives continuous vibration, restricts thermal pipe movement, uses an incorrectly sized U bolt, experiences surface settlement, or suffers from corrosion and inadequate inspection. This issue affects EPC contractors, pipe installers, industrial maintenance teams, equipment manufacturers and fastener distributors working with water, oil […]

Which M10–M24 U-Bolt Measurements Must Buyers Send Before an RFQ?

Which M10–M24 U-Bolt Measurements Must Buyers Send Before an RFQ?

Direct Answer: For an M10–M24 U-bolt RFQ, buyers should send a dimensioned drawing that defines thread diameter, inside width, leg or overall length, bend geometry, thread length, application diameter, material or grade requirement, surface finish, matching nuts/washers, quantity, and packing needs. Nominal thread size alone is not enough because different measurement datums can produce U-bolts […]

What Should Buyers Verify When Comparing Bolt Manufacturers?

What Should Buyers Verify When Comparing Bolt Manufacturers?

A bolt manufacturer should be evaluated against a defined joint, drawing and acceptance plan—not a product list or unit price alone. Buyers need to verify whether the supplier can manufacture the required geometry, control material and heat-treatment requirements where applicable, manage threads and coatings as one dimensional system, inspect critical characteristics, preserve batch traceability and […]

DIN 931 vs DIN 933 Hex Bolts: What Should Buyers Confirm Before Bulk Ordering?

DIN 931 vs DIN 933 Hex Bolts: What Should Buyers Confirm Before Bulk Ordering?

DIN 931-style half-thread and DIN 933-style full-thread hex bolts should not be selected from diameter and overall length alone. The practical choice depends on the joint stack, required grip, location of the thread transition, available nut engagement, mating hardware, material or property requirement, coating system and governing product specification. A half-thread bolt is not automatically […]

Frequently Asked Questions

Can an anchor fastener bolt be used in brick or hollow blockwork?

Not automatically. Brick, hollow blockwork and sound concrete have different strength and failure characteristics, so the anchoring method must match the substrate and the expected load. Confirm the base material, wall condition, edge distances and installation method before selecting the bolt.

When is a cast-in bolt preferable to a post-installed anchor?

Cast-in bolts are generally suited to new foundations where the bolt layout can be fixed before concrete placement. Post-installed anchors are more flexible for completed concrete, but drilling, hole cleaning, embedment and reinforcement clearance become important installation factors.

Does the same thread diameter make different anchor systems interchangeable?

No. A threaded rod used with chemical adhesive, an expansion anchor and a cast-in bolt may share a nominal thread size but behave differently in the substrate. The anchoring method, embedment arrangement, nut and washer compatibility, and design loading all need to match.

What information should accompany a quotation enquiry?

Send the application, base material, installation stage, quantity, drawing or marked-up hole layout, required diameter and length, usable thread or projection, and any bend or head arrangement. Also state whether the load is mainly tension, shear or a combination, and describe the environmental exposure so the available material or finish can be checked.

Is a coated anchor bolt always suitable for outdoor or damp service?

No. A coating or material should be selected for the actual moisture, chemical and maintenance conditions, and it must remain compatible with the mating nut and washer. Ask which finish or material is available and what exposure it is intended to address rather than treating all coated fasteners as equivalent.

Related Search

8mm anchor bolt drill size 10mm anchor fastener 10mm anchor fastener price 12mm anchor bolt 12mm anchor fastener 12mm anchor fastener price 16mm anchor bolt 8mm anchor fastener price 8mm anchor fastener 6mm anchor bolt

Leave Your Message

Tell us the base material, whether the bolts are cast-in or post-installed, and the required dimensions or drawing. Include the application and quantity if available.