Get Started

Epoxy Anchor Bolts for Concrete Fixing | Hebei Wotu Fastener Manufacturing Co., Ltd.

Epoxy Anchor Bolts for Concrete Fixing

Epoxy anchor bolts are chosen when a fixture must be fastened into existing concrete or masonry rather than cast into new concrete. The main decision is not only bolt size; the hole condition, embedment depth, base material, load direction and installation environment all affect whether the anchor will hold as intended.

For a buyer, the practical goal is to match the threaded rod, nut and washer package with the adhesive system and job-site conditions. A correct order should make installation straightforward and reduce the risk of loose anchors, failed pull tests or site rework.

Request Quote View Products

Related Products

7-letter, 9-letter L-shaped anchor bolt (Chinese national standard GB/T799-1988 embedded anchor screw)

7-letter, 9-letter L-shaped anchor bolt (Chinese national standard GB/T799-1988 embedded anchor screw)

Brand: Wotu Surface: Natural black oxide treatment, customized hot-dip galvanized, zinc plated as required Specifications: Follow Chinese national standard GB/T799-1988, in stock M12-M48, total length 120mm~1500mm, nonstandard customized diameter, bending length, total screw length available Matching: Nuts, flat washers and spring washers of the same specification can be supplied in complete sets. Packaging: Bundling and packaging, using wooden pallets and film-wrapped export packaging in large quantities

Read More
U-bolt ( / U-bolt, M10/M12/M16/M20/M24 multiple specifications)

U-bolt ( / U-bolt, M10/M12/M16/M20/M24 multiple specifications)

Brand: Wotu Surface: natural black oxide / hot-dip galvanized / blue-white zinc plated, multiple processes available Specifications: Based on common industry drawing parameters, suitable for pipe diameter 25mm~139.7mm, screw diameter M10~M24, total length can be nonstandard customized Matching: can be matched with nut, flat washer and spring washer of the same specifications for complete shipment Packaging: Bundling and packaging + 25kg export carton, full-container wooden pallet wrapped with film, supports private-label export packaging

Read More
Hex nut DIN934-1987 (A/B accuracy classification)

Hex nut DIN934-1987 (A/B accuracy classification)

Brand: Wotu Standard basis: German standard DIN934-1987, metric coarse thread/fine thread universal thread Surface: 304 stainless steel Specifications: M6～M24 full range of specifications Supporting equipment: same specification bolts, flat washer, spring washer complete set of shipment Packaging: 25kg standard carton, whole wooden pallet packaging

Read More
Hex thin nut

Hex thin nut

Brand: Wotu Surface: zinc plated Specifications: in stock M8~M64 full standard specifications, covering precision, machinery, and steel structure full size range, supporting nonstandard tooth pitch and customized thickness Matching: Can be matched with bolts of corresponding specifications, flat washer, spring washer complete set of shipment Packing: packed in 25kg cartons and packed on wooden pallets.

Read More
Hex nut (Chinese national standard GB52-1976)

Hex nut (Chinese national standard GB52-1976)

Brand: Wotu Surface: 304 stainless steel Specifications: in stock M6~M24 full standard metric specifications, supports nonstandard pitch, thickening/customized Matching: Can be matched with bolts of corresponding specifications, flat washer, spring washer complete set of supporting shipment Packaging: 25kg cartons, whole wooden pallets

Read More
Hex flange nut (Chinese national standard GB/T6177.1-2000)

Hex flange nut (Chinese national standard GB/T6177.1-2000)

Brand: Wotu Surface: zinc plated Specifications: in stockM6/M8/M10/M12/M14/M16/M20 Chinese national standardfull range of specifications, support nonstandard thickness, tooth pitch customized Matching: can be matched with bolts of the same specification, flat washer, spring washer complete set of shipment Packaging: 25kg cartons, whole wooden pallets

Read More

Epoxy Anchor Bolt Specifications to Confirm

Specification guide

Relevant selection criteria for epoxy anchor bolts include rod diameter, total length, threaded length, steel grade, surface finish, matching nuts and washers, packaging, and the installation details that affect embedment and projection. The fastening hardware should be checked against the adhesive system and project drawing before bulk ordering.

Criterion What To Check Why It Matters Buyer Tip
Base material and hole condition Confirm the anchor is intended for cracked or uncracked concrete, solid masonry, or another base material, and note whether holes may be dry, damp, water-filled, or overhead. Epoxy performance depends heavily on the substrate and hole condition. A system that works in dry concrete may not be suitable for damp holes or hollow materials. Ask: What base material and hole condition was the epoxy anchor system selected for?
Threaded rod size, embedment, and projection Compare the rod diameter, required embedment depth, and the length left above the surface for nuts, washers, base plates, or leveling grout. Too little embedment reduces capacity, while too little projection can prevent proper fastening after the plate or fixture is installed. Ask: Can you supply the anchor rod length based on our embedment depth, fixture thickness, washer, nut, and required exposed thread?
Epoxy system compatibility Verify that the adhesive, mixing nozzle, dispensing tool, and anchor rod material are specified as a matched installation system. Chemical anchors rely on correct mixing and bond to the rod and concrete. Mixing products or using the wrong nozzle can cause weak curing or uneven fill. Ask: Which epoxy cartridge, nozzle, and rod finish are intended to be used together for this order?
Corrosion exposure and rod finish Match the anchor rod material or coating to indoor dry use, outdoor weather, chemical exposure, coastal conditions, or buried installation. The adhesive may remain bonded while the steel corrodes if the rod finish is not suited to the environment. Ask: Should the rods be plain, zinc plated, hot-dip galvanized, or stainless for the project environment?
Installation control on site Confirm hole diameter, drilling method, cleaning steps, gel time, cure time, and installation temperature before ordering. Epoxy anchor bolts often fail from poor hole cleaning, disturbed rods before cure, or loading the anchor too early, not from the bolt alone. Ask: What installation instructions should be given to the site team for drilling, cleaning, curing, and tightening?

Choosing Anchor Rods for Adhesive Installation

The useful distinction is between mechanical anchors and adhesive anchors. A mechanical anchor grips by expansion or wedging inside the hole, while an epoxy anchor relies on bonded contact between the anchor rod, adhesive and drilled hole wall. That matters when edge distance, vibration, cracked concrete, hole cleanliness or fixture adjustment are part of the job.

Epoxy anchor bolts can suit retrofit work, base plates, equipment supports, railing posts and structural connections, but they require more control during installation. Hole drilling, dust removal, adhesive cure time and correct rod insertion are part of the fastening system, not separate details to decide later.

Start with the application, not the bolt alone. A base plate for machinery, a steel column connection and a handrail post can all use threaded anchor rods, but they may need different embedment, rod grade, finish and washer arrangements. Share the drawing or connection detail if it is available, especially the hole diameter, plate thickness and required projection above the concrete.

Confirm the base material and installation condition. Concrete strength, age, cracking condition, drilled-hole method, wet or dry holes and overhead installation can change the suitable adhesive and anchor detail. A common mistake is ordering rods based on nominal diameter while leaving the installer to guess the hole size and embedment depth on site.

Choose the metal finish for the exposure. Plain steel may be acceptable in dry indoor work, while galvanized or other corrosion-resistant finishes may be needed outdoors or in humid environments. The coating must be considered together with thread fit, nut engagement and the adhesive manufacturer’s installation guidance.

Before requesting a quote from Hebei Wotu Fastener Manufacturing Co., Ltd., prepare the anchor rod diameter and length, thread requirement, material or grade, finish, nut and washer needs, quantity and the adhesive system you plan to use. If the adhesive has not been selected, say that clearly so the quotation discussion can separate the metal fastener package from the resin specification.

Criteria Importance Description Example Options
Anchor type High when the connection is close to an edge, subject to vibration or installed into existing concrete Adhesive anchors bond the rod to the hole wall, while mechanical anchors grip by expansion or wedging. The better choice depends on the base material, load direction, spacing and installation constraints. A retrofit base plate in existing concrete may be reviewed for adhesive anchoring, while a simple non-structural fixture may use a mechanical anchor if the design allows it.
Embedment and projection Critical for fit-up and installed performance The rod must be long enough for the required embedment below the surface and the exposed thread above the fixture. Plate thickness, washer stack, leveling nuts and final nut engagement all affect the required length. A steel equipment base may need extra projection for a leveling nut, washer and top nut rather than just enough thread to pass through the plate.
Base material and hole condition Often decides whether an adhesive anchor detail is suitable Concrete strength, cracking condition, hole diameter, drilling method, dust removal, moisture and overhead installation can affect the adhesive anchor choice and installation process. A drilled hole with dust left inside may not bond as intended, even if the rod diameter and length are correct.
Rod material and surface finish Important for corrosion exposure and compatibility with the rest of the fastening package The steel grade and finish should match the application requirements and environment. Coatings can affect thread fit and should be checked with the specified nuts, washers and installation guidance. A dry indoor connection may use a different finish from a support installed in a damp or outdoor location.
Adhesive selection responsibility Important to avoid quoting or ordering an incomplete system Some projects already specify the resin or capsule system, while others only define the anchor rod hardware. Separating these details prevents confusion over what is included and what the installer or designer must approve. A purchase request may ask for threaded rods, nuts and washers only, while the project engineer separately approves the epoxy product and cure requirements.

Product Selection

Related Options

For a retrofit steel base plate or equipment support, the priority is usually a threaded anchor rod that gives the required embedment in concrete and enough exposed thread for leveling nuts, washers and final tightening. Confirm the installed projection, corrosion exposure and nut arrangement before choosing the final bolt specification.

Blog Articles / Reviews

Anchor Bolts: 7 Ordering Errors That Cause Site Rework

Anchor Bolts: 7 Ordering Errors That Cause Site Rework

ost anchor bolt ordering errors come from incomplete drawings, unclear dimensions, unsuitable material or coating choices, undefined tolerances, and mismatched nuts or washers. These mistakes affect steel fabricators, EPC contractors, equipment installers, importers, and distributors because anchor bolts are usually embedded before the connected structure arrives on site. Once concrete has cured, even a small […]

Applications of Anchor Bolts

Applications of Anchor Bolts

Fixed anchor bolts, also known as short anchor bolts, are cast in with the foundation and used to secure equipment that does not experience strong vibration or impact. 1. Fixed anchor bolts, also known as short anchor bolts, are cast in with the foundation and used to secure equipment that does not experience strong vibration […]

Why Do U Bolts Loosen in Pipe Supports? 6 Causes and Prevention Methods

Why Do U Bolts Loosen in Pipe Supports? 6 Causes and Prevention Methods

U bolts usually loosen in pipe supports because the connection loses clamping force, receives continuous vibration, restricts thermal pipe movement, uses an incorrectly sized U bolt, experiences surface settlement, or suffers from corrosion and inadequate inspection. This issue affects EPC contractors, pipe installers, industrial maintenance teams, equipment manufacturers and fastener distributors working with water, oil […]

DIN 931 vs DIN 933 Hex Bolts: What Should Buyers Confirm Before Bulk Ordering?

DIN 931 vs DIN 933 Hex Bolts: What Should Buyers Confirm Before Bulk Ordering?

DIN 931-style half-thread and DIN 933-style full-thread hex bolts should not be selected from diameter and overall length alone. The practical choice depends on the joint stack, required grip, location of the thread transition, available nut engagement, mating hardware, material or property requirement, coating system and governing product specification. A half-thread bolt is not automatically […]

The Widespread Application of Hot-Dip Galvanized Bolts in Daily Life

The Widespread Application of Hot-Dip Galvanized Bolts in Daily Life

Hot-dip galvanized bolts are widely used in daily life, especially due to their advantages, which have led to their rapid development in the market and widespread consumer appeal. So what are the specific advantages of hot-dip galvanized bolts in use? Today, Hebei Wotu Fastener Manufacturing Co., Ltd. will discuss this with you. 1. Due to […]

The Widespread Application of Hot-Dip Galvanized Bolts in Daily Life

The Widespread Application of Hot-Dip Galvanized Bolts in Daily Life

Hot-dip galvanized bolts are widely used in daily life, especially due to their advantages, which have led to their rapid development in the market and widespread consumer appeal. So what are the specific advantages of hot-dip galvanized bolts in use? Today, Hebei Wotu Fastener Manufacturing Co., Ltd. will explain. 1. Due to its special surface […]

Frequently Asked Questions

Can adhesive anchors replace cast-in-place anchor bolts?

They can be a practical option for retrofit work or missed embeds, but they are not a simple one-for-one replacement in every connection. The designer should confirm the required load, embedment depth, edge distance, concrete condition and adhesive suitability before changing from cast-in-place bolts.

What is the main trade-off between epoxy anchors and mechanical expansion anchors?

Epoxy anchors spread load through bonded contact and can be useful where expansion force is undesirable, such as near edges or in certain retrofit layouts. Mechanical anchors install faster in many cases because they do not need adhesive curing time, but they rely on expansion inside the drilled hole.

Is the threaded rod the same thing as the complete anchor system?

No. The rod, nut and washer are only the metal hardware; the drilled hole, cleaning method, adhesive, embedment depth and cure time are also part of the installed anchor performance. Treating the rod alone as the specification often leads to wrong hole sizes, poor projection or installation delays.

What information should be sent for a quotation?

Send the rod diameter and length, threaded length if it matters, material or grade, finish, nut and washer requirements, quantity and any drawing that shows plate thickness, embedment and exposed projection. Also state whether the adhesive has already been selected or if the quote is only for the metal fastener package.

Which finish should be considered for outdoor installation?

Outdoor or humid locations usually require more corrosion resistance than dry indoor work. Confirm the required finish, such as galvanized or another specified coating, together with thread fit, nut engagement and the adhesive system’s installation guidance.

Related Search

10mm anchor fastener 10mm anchor fastener price 12mm anchor bolt 12mm anchor fastener 12mm anchor fastener price 16mm anchor bolt 6mm anchor bolt 8mm anchor bolt 8mm anchor bolt drill size 8mm anchor fastener

Leave Your Message

Send the anchor rod diameter and length, steel grade or finish, and the installation drawing or required embedment/projection. Also note the base material and whether the adhesive system has already been specified.