Tata Sheet Price List 2022 Selection Guide | Hebei Wotu Fastener Manufacturing Co., Ltd.
A 2022 Tata sheet price list is usually useful only as a historical reference. If you are buying roofing or cladding sheets now, the decision should be based on the current sheet grade, profile, thickness, coating, order quantity and delivery location rather than an old published rate.
For a project quote, the practical question is not just the sheet price per piece or per square metre. You also need to confirm matching fasteners, washers, overlaps, accessories and wastage so the total installed material cost is clear.
Brand: Wotu Surface: zinc plated Specifications: in stock M8~M64 full standard specifications, covering precision, machinery, and steel structure full size range, supporting nonstandard tooth pitch and customized thickness Matching: Can be matched with bolts of corresponding specifications, flat washer, spring washer complete set of shipment Packing: packed in 25kg cartons and packed on wooden pallets.
Read More
Brand: Hengzuan Surface: blue and white zinc plated, can be customized color zinc plated, black oxide plated Specifications: Comply with GB/T15856.2 Chinese national standard, in stock ST3.5/ST4.2/ST4.8/ST5.5 mainstream wire diameter, rod length 13mm~50mm full range of specifications, nonstandard length customization on demand, drilling applicable plate thickness 2~5mm Packaging: 25kg export cartons, full pallets wrapped with film, supports neutral export packaging, private-label customization
Read More
Brand: Hengzuan Surface: Color zinc plated, optional blue-white zinc plated, black oxide treatment Specifications: Chinese national standard ST4.2/ST4.8/ST5.5 specifications, rod length 13~50mm in stock, supports nonstandard length customization Packaging: 25kg export cartons, full wooden pallets wrapped with film, supports neutral packaging, private-label customization
Read More
Brand: Hengzuan Surface: blue and white zinc plated, can be customized color zinc plated, black oxide plated Specifications: Comply with GB/T15856.2-2002 Chinese national standard, in stock ST4.2/ST4.8/ST5.5 full range of specifications, length 13mm~75mm optional, supports customized nonstandard rod lengths; drilling adaptation plate thickness 0.7~6mm Packaging: 25kg export cartons, full pallets wrapped with film, supports neutral export packaging, customer private-label customization
Read More
Brand: Hengzuan Surface: blue and white zinc plated, can be customized color zinc plated, black oxide plated Specifications: in stock 3.5/3.9/4.2/4.8/5.5 mainstream wire diameter, rod length 13mm~75mm full size range, nonstandard length can be customized as needed Packaging: 25kg export cartons, full wooden pallets wrapped with film, supports neutral export packaging, private-label customization
Read More
Brand: Hengzuan Surface: color zinc plated Specifications: in stock ST5.5/ST6.3 regular diameter, rod length 19mm~75mm in stock, supports nonstandard customized, suitable for drilling steel sheet thickness 2~5mm Packaging: carton packaging, full pallets wooden pallet packaging, support neutral packaging, private-label customization
Read MoreSheet and fastener selection
When comparing sheet-related materials, check the sheet specification together with the fastening method: profile, coating, support structure, washer material, corrosion exposure and installation environment. These details decide whether the lowest sheet price is actually suitable for the job.
| Criterion | What To Check | Why It Matters | Buyer Tip |
|---|---|---|---|
| Sheet grade and coating | Confirm the listed grade, coating type, surface finish, and intended application. | These details affect corrosion resistance, forming behavior, appearance, and suitability for roofing or fabrication. | Can you provide the exact material and coating description for each quoted sheet item? |
| Thickness, width, and length | Compare every dimension and confirm whether thickness is nominal or measured. | A lower price may reflect a thinner sheet or different dimensions, changing coverage, weight, and structural use. | Which dimensions does each price cover, and are custom lengths available? |
| Price basis and validity | Identify the currency, unit of sale, tax treatment, and whether the 2022 figure was a list price or quotation. | An old list price may not represent the amount payable today or include the same charges as another offer. | Is this price still applicable, and what charges must be added before comparison? |
| Quantity and order condition | Check whether the figure applies per sheet, per bundle, or by weight, and ask about minimum order quantities. | Different selling units can make apparently similar prices difficult to compare and affect the total purchase cost. | What quantity and packing basis must be used for this price? |
| Availability and delivery scope | Confirm the requested specification is available and clarify what collection or delivery point the quotation covers. | Transport, handling, and lead time can materially change the delivered cost, especially for long or heavy sheets. | Can you quote the delivered total for the required size, quantity, and destination? |
The main distinction is between a brand price list and a project quotation. A price list may show indicative rates for standard sheet sizes, while a quotation should reflect the exact material specification, cut length, colour or coating, packing, transport and any accessories required for installation.
This matters because two sheets that look similar can differ in corrosion resistance, stiffness, finish and usable coverage. A lower sheet price can become more expensive if it needs extra overlap, incompatible screws, replacement washers or additional sealing work on site.
Start by identifying the sheet type and application. Roofing sheets, wall cladding sheets and plain metal sheets are priced differently because the profile, coating and usable coverage are not the same. If the sheet will be exposed outdoors, coating and compatible fasteners deserve as much attention as the base metal.
Do not compare prices only by nominal length or piece count. Ask for the effective coverage width, recommended overlap and whether the quote is based on standard lengths or project cut lengths. These details affect the actual number of sheets and fasteners needed.
A common mistake is to choose sheet fasteners after the sheets have already been ordered. The screw material, drill point, washer type and coating should match the sheet, support structure and environment. Mismatched fasteners can damage the coating, leak at fixing points or shorten service life.
For a useful reply, send the sheet profile or drawing, material and coating requirement, approximate roof or wall area, support material and delivery destination. If you already have an old Tata sheet price list from 2022, include it only as a reference and ask for a current equivalent specification.
| Criteria | Importance | Description | Example Options |
|---|---|---|---|
| Old price list versus current quotation | Essential for avoiding outdated budgeting | A historical list may identify a product type, but a current quote reflects specification, quantity, accessories and delivery basis. | A 2022 sheet line can be used as a reference item, then re-quoted with the current profile, coating and order quantity. |
| Nominal size versus effective coverage | Important for calculating real material quantity | Profiled sheets overlap during installation, so the usable width or area may be less than the stated sheet size. | Two sheets with similar nominal widths may cover different roof areas after side laps are allowed. |
| Sheet price versus installed material cost | High impact on project budgeting | The sheet price alone may exclude fasteners, washers, ridges, flashing, sealing materials, wastage and transport. | A low sheet price may not be the lowest project cost if it requires more fixings or additional waterproofing accessories. |
| Sheet coating and fastener compatibility | Critical for outdoor durability | Fasteners should be compatible with the sheet material, coating, support structure and exposure environment. | A coated roofing sheet fixed outdoors should be paired with suitable screws and washers rather than chosen by screw price alone. |
| Standard lengths versus project cut lengths | Useful for reducing waste and installation issues | Standard stock lengths may be cheaper or quicker to source, while project cut lengths can reduce joints, offcuts and handling on site. | A roof run may be quoted with standard sheets plus overlaps, or with cut-to-length sheets if the supplier can offer that option. |
Related Options
For a roofing or wall cladding project, the priority is usually a compatible sheet-and-fastener combination rather than a single line price. A warehouse roof, farm building or industrial enclosure may each need different screw points, washer materials and corrosion protection to match the sheet system.
A hot-dip galvanized flat washer should be purchased as a defined joint component, not simply as an M-size metal disc. A usable specification identifies the dimensional standard and series, nominal size, inside and outside diameters, thickness, product grade, hardness or mechanical requirement, base material, coating requirement and the bolt, nut and bearing surface with which […]
ost anchor bolt ordering errors come from incomplete drawings, unclear dimensions, unsuitable material or coating choices, undefined tolerances, and mismatched nuts or washers. These mistakes affect steel fabricators, EPC contractors, equipment installers, importers, and distributors because anchor bolts are usually embedded before the connected structure arrives on site. Once concrete has cured, even a small […]
The correct self-tapping roofing screw depends on the complete panel-and-substrate stack-up. Steel supports typically require a point and thread matched to the support thickness and any pilot-hole requirement; timber supports require a wood-appropriate thread and sufficient embedment. In both cases, buyers must define diameter, length, head, sealing washer, material or coating, environment, pull-out requirements, and […]
Direct answer: Correct screw length does not guarantee a watertight metal-roof connection. Self tapping roofing screws can leak because of incorrect washer compression, enlarged or stripped holes, insufficient thread engagement, panel movement, or an unsuitable coating-and-washer system. Buyers should diagnose the complete installed connection—including panel profile, support thickness, point type, washer condition, and exposure—rather than […]
When ordering a blue zinc self drilling screw with a winged, countersunk configuration, diameter and length are not enough to define the application. The RFQ should identify the materials being connected, upper-material thickness, steel-substrate thickness, total material stack, required countersunk seating, screw diameter, total length, drill-point condition, wing geometry, surface treatment, installation method, quantity and […]
Direct Answer: A self-drilling screw has a drill-shaped point that creates a hole and then forms mating threads in a suitable material. A self-tapping screw forms or cuts mating threads but may require a correctly sized pilot hole. Selection depends on substrate type and thickness, joint stack, point geometry, installation tool, finish and application testing—not […]
It can be used as a reference for product names, sheet profiles or older budget records, but it should not be treated as a current buying price. Ask for a fresh quotation based on the exact sheet specification, quantity, location and accessories needed for the project.
The visible sheet price may not include the same coating, thickness, effective coverage, overlap allowance, fasteners, washers or transport basis. A cheaper sheet can cost more in practice if it needs more pieces, more fixing points or additional sealing work.
They should be checked together. The screw point, coating, washer and length need to suit the sheet profile, support structure and exposure conditions; otherwise the fixing points may leak, damage the sheet coating or wear faster than expected.
Price per square metre is usually more useful, but only if it is based on effective coverage rather than nominal sheet width. For profiled roofing and cladding, overlaps and rib geometry can change the number of sheets needed.
Send the old reference item if you have it, plus the required sheet profile, material, coating or colour, thickness if known, project area, support material and delivery destination. If matching fasteners are required, include whether the sheets will be fixed to steel, timber or another structure.
Send the sheet profile or drawing, material and coating requirement, and delivery destination. If you need matching fasteners, include the support material and installation environment.
