Get Started

L Bolt Anchors | Hebei Wotu Fastener Manufacturing Co., Ltd.

L Bolt Anchors for Concrete Bases

An L bolt is usually bought for anchoring a base plate, post, frame, machinery foot or embedded bracket into concrete. The key decision is not only the bolt diameter, but the bend geometry, embedded length, thread length, material grade and surface finish that match the load, concrete detail and installation sequence.

For a purchasing inquiry, a clear drawing or dimension set prevents the most common problem: receiving an anchor that fits the nut but does not fit the template, hole pattern, projection height or concrete embedment required on site.

Request Quote View Products

Related Products

Hot-Dip Galvanized Hex Head Bolt (DIN931 Half Thread / DIN933 Full Thread / GB30 Chinese National Standard Bolt, Can Be Equipped With Nut And Washer Set)

Hot-Dip Galvanized Hex Head Bolt (DIN931 Half Thread / DIN933 Full Thread / GB30 Chinese National Standard Bolt, Can Be Equipped With Nut And Washer Set)

Brand: Wotu Surface: overall hot-dip zinc plating treatment Specifications: Comply with DIN and GB standards, in stock M6-M48 full range of specifications, length 20mm-300mm, supports nonstandard customized. Packaging: woven bag inside / 25kg export carton, film-wrapped wooden pallet; supports neutral packaging and customer private-label customization.

Read More
U-bolt ( / U-bolt, M10/M12/M16/M20/M24 multiple specifications)

U-bolt ( / U-bolt, M10/M12/M16/M20/M24 multiple specifications)

Brand: Wotu Surface: natural black oxide / hot-dip galvanized / blue-white zinc plated, multiple processes available Specifications: Based on common industry drawing parameters, suitable for pipe diameter 25mm~139.7mm, screw diameter M10~M24, total length can be nonstandard customized Matching: can be matched with nut, flat washer and spring washer of the same specifications for complete shipment Packaging: Bundling and packaging + 25kg export carton, full-container wooden pallet wrapped with film, supports private-label export packaging

Read More
7-letter, 9-letter L-shaped anchor bolt (Chinese national standard GB/T799-1988 embedded anchor screw)

7-letter, 9-letter L-shaped anchor bolt (Chinese national standard GB/T799-1988 embedded anchor screw)

Brand: Wotu Surface: Natural black oxide treatment, customized hot-dip galvanized, zinc plated as required Specifications: Follow Chinese national standard GB/T799-1988, in stock M12-M48, total length 120mm~1500mm, nonstandard customized diameter, bending length, total screw length available Matching: Nuts, flat washers and spring washers of the same specification can be supplied in complete sets. Packaging: Bundling and packaging, using wooden pallets and film-wrapped export packaging in large quantities

Read More
Hex nut DIN934-1987 (A/B accuracy classification)

Hex nut DIN934-1987 (A/B accuracy classification)

Brand: Wotu Standard basis: German standard DIN934-1987, metric coarse thread/fine thread universal thread Surface: 304 stainless steel Specifications: M6～M24 full range of specifications Supporting equipment: same specification bolts, flat washer, spring washer complete set of shipment Packaging: 25kg standard carton, whole wooden pallet packaging

Read More
Hex thin nut

Hex thin nut

Brand: Wotu Surface: zinc plated Specifications: in stock M8~M64 full standard specifications, covering precision, machinery, and steel structure full size range, supporting nonstandard tooth pitch and customized thickness Matching: Can be matched with bolts of corresponding specifications, flat washer, spring washer complete set of shipment Packing: packed in 25kg cartons and packed on wooden pallets.

Read More
Hex nut (Chinese national standard GB52-1976)

Hex nut (Chinese national standard GB52-1976)

Brand: Wotu Surface: 304 stainless steel Specifications: in stock M6~M24 full standard metric specifications, supports nonstandard pitch, thickening/customized Matching: Can be matched with bolts of corresponding specifications, flat washer, spring washer complete set of supporting shipment Packaging: 25kg cartons, whole wooden pallets

Read More

Key dimensions and finishes for L bolts

Selection criteria

Useful L bolt selection starts with the anchor shape and installation detail: diameter, thread pitch, overall length, bend leg length, thread length, material grade, finish and compatible nuts or washers. If the application involves concrete embedment, include the base plate drawing and anchor layout so the part can be checked against the real installation, not only against a single bolt dimension.

Criterion What To Check Why It Matters Buyer Tip
Leg length and bend geometry Confirm the short leg, long leg, inside bend radius, and whether the bend must be a sharp 90° or a larger radius. An L bolt depends on the bent leg for anchorage or positioning. A small change in leg length or bend shape can affect embedment, edge clearance, and how the bolt fits the template or base plate. Can you share a drawing showing the long leg, short leg, bend radius, and tolerance needed on each dimension?
Thread size and threaded length Verify the nominal diameter, thread pitch, total threaded length, and whether the thread starts after a plain shank section. Too little thread may not allow nut adjustment after leveling; too much thread can place threads inside the concrete or bearing area where a plain shank was expected. Where should the threaded section begin and end after the L bolt is installed?
Material grade and strength requirement Match the bolt material or strength grade to the structural drawing or project specification instead of ordering by shape alone. L bolts with the same dimensions can carry different loads depending on material and heat treatment. The wrong grade can create approval problems or unsafe capacity assumptions. Does your drawing call for a specific standard, steel grade, or mechanical property class?
Surface finish for the environment Confirm whether the bolt needs plain finish, zinc plating, hot-dip galvanizing, or another coating, and check nut compatibility with the coating thickness. Outdoor, wet, or corrosive sites usually need better corrosion protection. Thick coatings can also affect thread fit if matching nuts are not planned correctly. Will the L bolts be exposed to weather, concrete moisture, chemicals, or indoor dry conditions?
Installation layout and base plate fit Compare bolt projection, anchor spacing, hole diameter, and template requirements with the base plate or equipment drawing. Many site rework problems come from bolts that are correct individually but do not match the installed pattern or required projection above the foundation. Can you provide the base plate drawing or anchor bolt layout before confirming the order?

What to confirm before ordering L anchor bolts

The practical difference between an L bolt and a straight anchor bolt is the formed leg at the embedded end. The L-shaped bend helps provide mechanical anchorage in concrete, while the threaded end remains exposed for fastening the base plate or fixture. That bend makes the bolt less interchangeable than a standard hex bolt because the inside bend radius, leg length and orientation can affect placement and cover.

L bolts are also different from J bolts and U bolts. A J bolt has a curved hook rather than a right-angle leg, and a U bolt clamps around pipe or round members rather than acting as a single embedded anchor. If the drawing calls for an L anchor, do not substitute another shape without checking the structural detail or the engineer’s requirement.

Start with the installed geometry. Confirm the thread diameter, total length, embedded leg length, exposed thread length, bend angle and any required projection above the concrete. A small error in projection can make leveling nuts, washers or base plates difficult to fit after the concrete sets.

Choose the material and finish for the environment, not just for appearance. Plain steel may suit protected indoor work, while hot-dip galvanizing is often considered for outdoor or corrosive exposure. If galvanizing is required, confirm thread fit after coating because the coating thickness can affect nut assembly.

Check how the L bolts will be positioned during casting. Buyers often focus on the bolt itself and forget the template, hole spacing, orientation of the bent leg and tolerance at the base plate. For grouped anchors, provide the full bolt layout rather than ordering each bolt as an isolated item.

Before placing an order with Hebei Wotu Fastener Manufacturing Co., Ltd., send the drawing or dimension sketch, material or grade requirement, surface finish, nut and washer requirements, quantity and packaging expectations. If the part must match an existing site standard, include the project specification rather than relying on a verbal description.

Criteria Importance Description Example Options
Anchor shape High for concrete embedment and design compatibility L, J and straight anchors are not simply different appearances. The embedded end changes how the part fits the concrete detail and how it is positioned before pouring. A base plate detail calling for a right-angle leg should not be changed to a hook shape without design approval.
Projection and thread length Critical for assembly after concrete sets The exposed threaded portion must allow for the base plate thickness, washers, nuts and any leveling requirement. Too little projection can stop installation; too much may interfere with equipment or finishing. A machinery foot may need enough thread above the plate for a washer and full nut engagement.
Bend leg length and orientation Important for fit inside formwork and reinforcement The bent section must fit the concrete member and avoid conflict with reinforcement, edge cover and adjacent anchors. This is especially important when multiple anchors are installed through a template. A group of four anchors may need all bent legs oriented consistently to clear rebar and maintain spacing.
Material and surface finish Depends on exposure and project specification Plain steel, coated steel and galvanized finishes serve different environments. Finish choice can also affect thread assembly, so compatible nuts and washers should be confirmed. An outdoor post base may require a corrosion-resistant finish, while an indoor protected installation may follow a different specification.
Individual bolt dimensions versus full layout High when anchors must match a base plate or template A single bolt drawing may not be enough if the anchors are installed as a set. Hole spacing, projection height and template tolerance can decide whether the base plate drops into place. Providing the base plate hole pattern helps avoid anchors that are correct individually but misaligned as a group.

Product Selection

Related Options

For structural bases, equipment feet and embedded post supports, the priority is repeatable fit at the template and reliable thread engagement after installation. An L bolt that looks correct on its own can still cause rework if the bend length, projection or coating choice does not match the concrete formwork and fastening hardware.

Blog Articles / Reviews

Anchor Bolts: 7 Ordering Errors That Cause Site Rework

Anchor Bolts: 7 Ordering Errors That Cause Site Rework

ost anchor bolt ordering errors come from incomplete drawings, unclear dimensions, unsuitable material or coating choices, undefined tolerances, and mismatched nuts or washers. These mistakes affect steel fabricators, EPC contractors, equipment installers, importers, and distributors because anchor bolts are usually embedded before the connected structure arrives on site. Once concrete has cured, even a small […]

Why Do U Bolts Loosen in Pipe Supports? 6 Causes and Prevention Methods

Why Do U Bolts Loosen in Pipe Supports? 6 Causes and Prevention Methods

U bolts usually loosen in pipe supports because the connection loses clamping force, receives continuous vibration, restricts thermal pipe movement, uses an incorrectly sized U bolt, experiences surface settlement, or suffers from corrosion and inadequate inspection. This issue affects EPC contractors, pipe installers, industrial maintenance teams, equipment manufacturers and fastener distributors working with water, oil […]

Which M10–M24 U-Bolt Measurements Must Buyers Send Before an RFQ?

Which M10–M24 U-Bolt Measurements Must Buyers Send Before an RFQ?

Direct Answer: For an M10–M24 U-bolt RFQ, buyers should send a dimensioned drawing that defines thread diameter, inside width, leg or overall length, bend geometry, thread length, application diameter, material or grade requirement, surface finish, matching nuts/washers, quantity, and packing needs. Nominal thread size alone is not enough because different measurement datums can produce U-bolts […]

What Should Buyers Verify When Comparing Bolt Manufacturers?

What Should Buyers Verify When Comparing Bolt Manufacturers?

A bolt manufacturer should be evaluated against a defined joint, drawing and acceptance plan—not a product list or unit price alone. Buyers need to verify whether the supplier can manufacture the required geometry, control material and heat-treatment requirements where applicable, manage threads and coatings as one dimensional system, inspect critical characteristics, preserve batch traceability and […]

DIN 931 vs DIN 933 Hex Bolts: What Should Buyers Confirm Before Bulk Ordering?

DIN 931 vs DIN 933 Hex Bolts: What Should Buyers Confirm Before Bulk Ordering?

DIN 931-style half-thread and DIN 933-style full-thread hex bolts should not be selected from diameter and overall length alone. The practical choice depends on the joint stack, required grip, location of the thread transition, available nut engagement, mating hardware, material or property requirement, coating system and governing product specification. A half-thread bolt is not automatically […]

The Widespread Application of Hot-Dip Galvanized Bolts in Daily Life

The Widespread Application of Hot-Dip Galvanized Bolts in Daily Life

Hot-dip galvanized bolts are widely used in daily life, especially due to their advantages, which have led to their rapid development in the market and widespread consumer appeal. So what are the specific advantages of hot-dip galvanized bolts in use? Today, Hebei Wotu Fastener Manufacturing Co., Ltd. will discuss this with you. 1. Due to […]

Frequently Asked Questions

Can an L-shaped anchor be used for machinery bases?

Yes, it can be suitable when the base plate, load requirement and concrete embedment detail are designed for that anchor shape. The buyer should confirm the required projection above the concrete, thread engagement for the nut, and the bolt layout before ordering.

Is a J bolt interchangeable with an L bolt?

Not automatically. A J bolt uses a curved hook, while an L bolt uses a bent leg, so the anchorage behavior and placement space can differ. If a drawing specifies one shape, substitution should be approved by the project engineer or specification owner.

What is the most common ordering mistake with these anchors?

A common mistake is ordering by diameter and total length only. Bend length, thread length, projection height, coating, nut fit and template spacing can all affect whether the anchor works on site.

Should the bolts be hot-dip galvanized?

Hot-dip galvanizing is often considered for outdoor or corrosive environments, but it should match the project requirement and compatible nuts. Because the coating adds thickness, confirm thread fit and any nut requirements before production.

What information should be sent for a purchasing inquiry?

Send a drawing or sketch showing diameter, thread pitch if required, total length, bend leg length, thread length, material or grade, finish, quantity and matching hardware. For grouped anchors, include the base plate hole pattern or installation template so spacing and projection can be checked.

Related Search

1 inch nut bolt a bolt and nut forms allen cap bolt allen bolt types allen bolt size chart pdf allen bolt size chart allen bolt size allen bolt head types allen bolt head size allen bolt dimensions

Leave Your Message

Send the bolt drawing or main dimensions, required material and surface finish, plus the quantity and matching nut or washer requirements. If the bolts fit a base plate or template, include the hole layout and required projection height.